Automatic Folded Skirt

		Calculation of folded skirt
		Main parameters of skirt
		Waist circumference (cm)				Illustration
		Front length (cm)
		Side length (the finished underskirt with petticoat measured) (cm)				Make a mock-up at 1:2 scale before cutting!!! Check the depth of folds on petticoat and overskirt, the position and length of side. Make alterations for final calculation and cutting!
		If there is no train, then we enter the length of the skirt along the back. Back seam length with train (cm)
		This table is for fabrics no wider than 160 cm !!! Fabric width (cm)
		Width of ready belt (cm)
		Calculation
		Belt length with seam allowance for cutting (cm)
		Belt width with seam allowance for cutting (cm)

Calculation of front gores
Main parameters of skirt	Calculations for gore drafting (all figures in cm)
Waist semi-circumference (cm)		top
Front length (cm)		"0"
Side length (the finished underskirt measured) (cm)	left (side seam)	Front gore #1	""
Front bottom length (without folds) (cm)	"0"	Front gore #1	""
Calculation	Illustration 1	bottom
Minimum 4, maximum 10! If you envisage an ordinary wedge in the center of the front, then count it as 1 piece! See Illustration 1. If in the center of the front you provide a wide wedge, then count it as 2 pieces! See Illustration 2. Number of front gores	Illustration 2	"0"
Attention! Set the actual desired number of folds! See illustrations 3 and 4. Number of folds	Illustration 3
Distance between folds Upper length of front gore without folds (cm)	Illustration 4	""
Desired fold depth on waist (cm)	Illustration 5	""
Bottom length of front gore without folds (cm)		""	""
Desired fold depth in the bottom (cm)	""	""	""
Deflection in upper center (cm)		""
Deflection in bottom center (cm)		""

See illustration 5 for an explanation! Upper length for cutting (cm)		""
See illustration 5 for an explanation! Bottom length for cutting (cm)		""
Bottom length with folds (cm)	""	""	""
See illustration 5 for an explanation! Upper length of side gores for cutting!!!	""	""	""
See illustration 5 for an explanation! Bottom length of side gores for cutting!!!		""
		""

		""
		""
	""	""	""
	""	""	""
		""
		""

		""
		""
	""	""	""
	""	""	""
		""
		""

Calculation of skirt back (train) with fold (half-circle)
Main parameters of skirt
Waist semi-circumference (cm)		Illustration
Side length (cm)
If there is no train, then we enter the length of the skirt along the back. Back seam length with train (cm)
Total desired number of back folds
Distance between folds
Desired number of waist folds (cm)
Fabric width (cm)
Calculation
Radius R1 (cm)
Radius R2 (cm)	"0"
Radius along back (R4) (cm)	"0"
Auxuliary Radius along back (R5) (cm)	"0"
Length of waist cut with folds (cm)	"0"

Back bottom length (m)

Fabric consumtion for skirt back with fabric width of 150 cm (m)